Helios: Torch Alignment Check Videos


*NOTE:  Have the torch alignment tool and the load coil spacer on hand prior to beginning this procedure.

→ Step 01:
Switch off the RF generator power using the RFG circuit breaker on the right side of the Helios™.

→ Step 02:
Open the front door of the Helios and view the positions of the screws in the screw assembly of the load coil with respect to one another. Ensure that they are evenly spaced.

→ Step 03:
Insert the load coil spacer by turning it clockwise onto the load coil.

→ Step 04:
Insert the torch alignment tool over the torch body. Check that the torch is flush with the edge of the tool. Spin the tool to ensure that it spins freely between the load coil and the torch body.